|
|
|
NOMAD Free Standing Cranes Components
-
Wire Rope Hoist with 20 ft. of lift and a lifting speed of 16/2.6 FPM
with trolley speed at 65/16 FPM.
-
Endtrucks with a travel speed of 80 or 120 FPM (VFD) complete with
mounting plates, bolts and bumpers. (Single and two-speed drives also
available.)
-
Trolley Tow Arm with pipe clamps to be cut to suit by builder and bolted
or welded to the trolley.
-
Complete trolley and sliding push button Festoon Systems with all
required mounting hardware. Cables are pre-wired to quick disconnect plugs.
Festoon trolleys are already attached to cables.
-
Bridge Conductor Cables are pre-wired to quick disconnect plugs.
-
Eight-button Push Button Station, plug-in type, with strain relief cable
and emergency stop button.
-
Bridge Control Panel with lockable mainline disconnect mainline fuse,
mechanical and electrical interlocking contactors and motor protection. Power
and control connections are pre-wired through terminal strips to quick
disconnect plugs. Panel is mounted in a NEMA-12 enclosure.
Note: Components are based on 460/3/60 power supply. For other voltages,
please contact EMH, Inc.
-
Free Standing Runway Frame in standard lengths from 20 to 120 feet.
Longer runways available; consult EMH, Inc. for details.
-
Trolley End Stops
-
Detailed Engineering for bridge construction and crane assembly,
including two copies of the maintenance manual.
|
|
 |